Electric Vehicle / Fuel-Cell Vehicle Testing Solutions

Battery Separator (Plastic film)

Description
Gas transmission rate (Hydrogen etc.)	No.571 Gas Transmission Rate Tester (Hydrogen gas etc.)
Air permeation resistance	No.158 Gurley type Densometer
Coefficient of Friction (Horizontal)	No.557 Friction Tester (HM-3)
	No.260 Universal Testing Machine “Strograph VG” with slide test tool
Coefficient of Friction (COF, Slip angle)	No.557 Friction Tester (AN)
Puncture testing	No.260 Universal Testing Machine “Strograph VG” with puncture jig
Tensile testing (Automated)	No.211 Automated Tensile Tester “Strograph AE Film”
Tensile testing (Manual)	No.260 Universal Testing Machine “Strograph VG” with pnumatic grip
Peeling test	No.260 Universal Testing Machine “Strograph VG” with peeling test jig.

Battery pack (Plastics)

Tensile testing (Temp. control -50°C to +200°C)	No.120 Universal Testing Machine “Strograph T” with thermostatic bath
3-points flexure testing (Automated)	No.509 Automated 3-points flexure testing machine “Bendograph”
3-points flexture testing (Manual)	No.260 Universal Testing Machine “Strograph VG” with bending tool
Charpy/Izod impact test (Temp. control -40°C to +40°C)	No.526 Charpy/Iaod Impact Tester with Thermostatic Chamber
Melt Flow Index (MFR/MVR)	No.522 Melt Indexer
Flame retardancy	No.607 Cone Calorimeter

Electric cable coating (PVC)

Tensile testing	No.260 Universal Testing Machine “Strograph VG”
Heat aging	No.272 Geer Oven
Scrape abrasion	No.413 ISO type Scrape Abrasion Tester
Low temperature	No.525 Brittle Point Temperature Tester
Plasticization evaluation	No.655 Labo Plastomill with roller type mixer
Thermal stability evaluation
Plasticizer absorption evaluation
PVC dry blending	No.655 Labo Plastomill with Planetary mixer
Extrusion simulation test	No.655 Labo Plastomill with Single-screw extruder and T-die

Flexible printed circuits (FPC)

Folding endurance test	No.530 MIT type Folding Endurance Tester
Bending test	No.674 FPC Bending Tester

 

 

Automotive Testing Solutions (Other than above)

Exterior & interior materials (Plastics)

Tensile testing (Automated)	No.218 Automated Tensile Tester “Strograph AP”
Tensile testing (Manual operation)	No.260 Universal Testing Machine “Strograph VG”
Tensile testing (Temp. control)	No.120 Universal Testing Machine “Strograph T” with thermostatic bath
3-points flexure testing	No.260 Universal Testing Machine “Strograph VG” with bending tool No.509 Automated 3-points Flexure Testing Machine “Bendograph”
Tensile creep test	No.259 Creep Tester
Repeated Vibration Fatigue	No.395 Repeated Vibration Fatigue Tester
Drop impact test	No.451 DuPont Impact Tester No.452 Sheet Impact Tester
Abrasion testing	No.430 Taber type Abrasion Tester
Melt Flow Index (MFR/MVR)	No.520 Melt Flow Rater No.521 Semi Auto Melt Indexer No.522 Melt Indexer
Melt viscosity	No.583 Capillary Rheometer “Capilograph”
P-V-T	No.633 P-V-T Test System
Charpy/Izod Impact Test	No.556 Charpy/Izod Impact Tester
Charpy/Izod Impact Test (Temp. control)	No.526 Charpy/Izod Impact Tester with Thermostatic Chamber
Notching for impact test specimen	No.628 Notching Tool
Heat distortion temperature/Vicat softening point	No.533 HDT/VICAT Tester
Density/Specific gravity	No.265 Automatic Densimeter
Specimen preparation (Press machine)	No.519 Mini Test Press No.594 Labo Press No.694 Fine Labo Press

Tire (Rubber & textile cord)

Tensile strength (Rubber, automated)	No.211 Automated Tensile Tester “Strograph AE”
Tensile strength (Rubber, manual)	No.260 Universal Testing Machine “Strograph VG” with pnumatic chuck
Tensile strength (Tire cord)	No.260 Universal Testing Machine “Strograph VG” with cord chuck
De Mattia Flex-Cracking	No.255 De Mattia Flex-Cracking Tester
De Mattia Flex-Cracking (Temp. control)	No.263 De Mattia Flex-Cracking Tester with Chamber
Abrasion testing (DIN type)	No.276 DIN type Abrasion Tester
Abrasion testing (Akron type)	No.217 Akron type Abrasion Tester
Rebound resilience (Tripsometer method)	No.221 Resilience Tester
Rebound resilience (Schob type, automatic)	No.231 Schob type Automatic Rebound Tester
Rebound resilience (Schob type, manual)	No.232 Schob type Rebound Tester
Mooney viscosity	No.275 Mooney Viscometer
Vulcanization characteristics (Cure curve, Moving Die Rheometer)	No.292 Rotorless Rheometer (MDR)
Heat aging	No.272 Geer Oven
Ozone aging	No.253 UVC Ozone Aging Tester
Tack test	No.235 PICMA Tack Tester
Tack test (Hand held)	No.236 Tackiness Checker
Density/Specific gravity	No.265 Automatic Densimeter
Gas transmission rate	No.571 Gas Transmission Rate Tester
Blow point	No.642 High Speed Blow Point Tester
Viscoelastic properties	No.651 Rheolograph-Solid
Kneeding	No.655 Labo Plastomill

Seal, Hose (Rubber)

Tensile strength	No.211 Automated Tensile Tester “Strograph AE” No.260 Universal Testing Machine “Strograph VG”
Mooney viscosity	No.275 Mooney Viscometer
Vulcanization characteristics (Cure curve)	No.292 Rotorless Rheometer (MDR)
Heat aging	No.272 Geer Oven
Ozone aging	No.253 UVC Ozone Aging Tester
Low temperature (TR test)	No.226 Low Temperature Retraction Tester
Low temperature (Gehman test)	No.223 Gehman Stiffness Tester
Low temperature (Brittleness temperature)	No.525 Brittle Point Temperature Tester
Density/Specific gravity (Automated)	Fully Automated Densimeter (DSG-A)
Density/Specific gravity (Manual)	No.265 Automatic Densimeter (DSG-1)
Kneeding	No.655 Labo Plastomill

Seat (Fabric)

Abrasion resistance	No.430 Taber type Abrasion Tester
Bursting strength	No.167 Mullen burst tester
Stiffness	No.108 Digital Clark Stiffness Tester
Coefficient of Friction (Horizontal)	Friction Tester (HM-3)
Coefficient of Friction (Slip angle)	Friction Tester (AN)
Air permeability	No.869 Frazier type Permeameter
Flammability	No.501 MVSS Flammability Tester
Flame retardancy	No.607 Cone Calorimeter

Seat (Leather)

Coefficient of Friction (Horizontal)	Friction Tester (HM-3)
Coefficient of Friction (Slip angle)	Friction Tester (AN)
Folding & Abrasion resistance	No.363 Scott type Folding and Abrasion Tester

Air bag textiles

Air permeability

No.869 Frazier type Permeameter