Fully-Automated Density Tester for Plastics and Rubber / Fully Automatic Densimeter | 265-DSG-A2
Fully-Automated Density Tester for Plastics and Rubber / Fully Automatic Densimeter | 265-DSG-A2
Application(s): Determining density of plastic or rubber specimens
The Fully Automatic Densimeter, model DSG-A2 is an immersion method density tester for plastic or rubber specimens which all measurements are performed automatically by simply setting the specimens.
| ISO 1183-1 | Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method |
| ISO 2781 | Rubber, vulcanized or thermoplastic — Determination of density |
| ASTM D792 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| Measurement Unit | |
| Balance unit capacity | 100g |
| Balance unit resolution | 0.0001g (0.1mg) |
| Beaker lifting mechanism | Motorized |
| Immersion time range | 1 to 999sec. |
| Power supply | Single-phase, AC100-240V, 50/60Hz, 0.1kVA |
| Dimensions | W290 × D443 × H890mm |
| Weight | approx. 35kg |
| Automated Specimen Feeder | |
| Specimen Dimensions (e.g.) | ● 40×40×2mm
● ∅40×2mm etc. (to be discussed) Note: Actual specimen needs to be confirm before quotation. Additional charge may be required for design change depending on specimen property/shape/dimensions. |
| Number of Specimens | max. 64 specimens (vary depending on dimensions) |
| Power Supply | Single-phase, AC100-240V, 50/60Hz, 2kVA |
| Compressed Air | 0.3MPa |
| Dimensions | W300 × D600 × H850mm |
| Weight | approx. 40kg |
Contact
-
Inquiries from the web
Contact Form -
Inquiries by telephone