TOYOSEIKI GENERAL CATALOGUE

48/72

46 GENERAL CATALOGUE4No.666 LABO PLASTOMILL MICRO (μ)No.655 LABO PLASTOMILL46 GENERAL CATALOGUE■APPLICATIOＮ　 This device incorporates small size mixer and extruder and is used to evaluate prosessability i.e. mixing, extruding, gelation, dynamic thermal stability, etc. of plastics and rubber, etc.■SPECIFICATIONS■APPLICATIOＮ　 This is the device developed exclusively for laboratory level testing where special and expensive and yet very small quantity of specimens such as ultrane particles used for nanocomposite materials are being synthesized. For example, practical application and research of composite materials (silk, shell, tooth, bone, etc. which are so called as intelligent materials) limelighted as the composites in the natural world of the next generation are obtainable only in very small quantities. Even with such a small quantities of specimens, this bench top testing device has made possible to evaluate processability, mixing, kneading, extruding characteristics. ■SPECIFICATIONS　Revolutions per minute･･･････････0〜100 rpm, coecient of load 　　　　　　　　　　　　　　　　uctuation: ±0.1 %Torque range････････････････････Max. 40 N･m (Current conversion 　　　　　　　　　　　　　　　　method)Temperature measurement range･･0〜400℃Data display････････････････････Data curve displayed on liquid 　　　　　　　　　　　　　　　　crystal screenSafety device･･･････････････････Torque & temperature limiter, 　　　　　　　　　　　　　　　　Emergency stop, Mixer 　　　　　　　　　　　　　　　　disassemble safety circuitElectric source･････････････････AC 100V, 1-P, 20A, 50/60HzDimensions & weight････････････W400×D600×H630 mm, approx. 50 kg■REFERENCE STANDARDSASTM D 2538 PROCESSABILITIES4 PROCESSABILITIES KNEADING, EXTRUDING…（PLASTIC, RUBBER, OTHERS）PROCESSABILITIES55 PROCESSABILITIES5 PROCESSABILITIES50GENERAL CATALOGUENo.655LABO PLASTOMILLNo.666LABO PLASTOMILL MICRO (μ)KNEADING, EXTRUDING…（PLASTIC, RUBBER, OTHERS）■APPLICATIONThis device incorporates small size mixer and extruder and is used toevaluate prosessability i.e. mixing, extruding, gelation, dynamicthermal stability, etc. of plastics and rubber, etc.■SPECIFICATIONSModelRevolutionsper minuteTorquerangeTemperatureData processingElectricsourceDimensionsWeight Model C0.2～150, 0.1～100 rpm400, 1000 N･mPersonal computerMain unit: W730×D1000×H1270 mm, Computer systemW600×D530×H1370 mmMain unit: approx. 250 kg,Computer system approx. 60 kgMain unit: W730×D1000×H530 mm, RackW730×D1000×H740 mmMain unit: approx. 220 kg,Rack approx. 25 kg,MR type : Only torque meterM type : Torque detector―Model M1～100, 1～150 rpmDiers according to mixer head (max. 500℃)AC 100V & 200V, 1-P & 3-P, up to 32A, 50/60Hz.Diers according to type■APPLICATIONThis is the device developed exclusively for laboratory level testingwhere special and expensive and yet very small quantity ofspecimens such as ultrane particles used for nanocompositematerials are being synthesized. For example, practical applicationand research of composite materials (silk, shell, tooth, bone, etc.which are so called as intelligent materials) limelighted as thecomposites in the natural world of the next generation are obtainableonly in very small quantities. Even with such a small quantities ofspecimens, this bench top testing device has made possible toevaluate processability, mixing, kneading, extruding characteristics.■SPECIFICATIONSRevolutions per minute･･･････････0～100 rpm, coecient of loaductuation: ±0.1 %Torque range････････････････････Max. 40 N･m (Currentconversion method)Temperature measurement range･･0～400℃Data display･････････････････････Data curve displayed on liquidcrystal screenSafety device････････････････････Torque & temperature limiter,Emergency stop, Mixerdisassemble safety circuitElectric source･･･････････････････AC 100V, 1-P, 20A, 50/60HzDimensions & weight･････････････W400×D600×H630 mm, approx. 50 kg■REFERENCE STANDARDSASTM D 2538Model Model CModel MRevolutions per minute 0.1〜150, 0.1〜100 rpm1〜100, 1〜150 rpmTorque range 400, 1000 N･mMR type : Only torque meter M type : Torque detector Temperature Diers according to mixer head (max. 500℃) Data processing Personal computer ─Electric source AC 100V & 200V, 1-P & 3-P, up to 32A, 50/60Hz. Diers according to typeDimensions Main unit: W730×D1000× H1270 mm, Computer system W600×D530×H1370 mmMain unit: W730× D1000×H530 mm, Rack W730×D1000×H740 mmWeight Main unit: approx. 340 kg, Computer system approx. 30 kgMain unit: approx. 310 kg, Rack approx. 25 kg,WITH TWIN SCREW EXTRUDER 2D15WNo.666SEGMENT SCREWNo.655 (MODEL M)No.655 (MODEL C)

※このページを正しく表示するにはFlashPlayer10.2以上が必要です