back to top

Related Testing Standards

Related Testing Standards

 

ISO Corresponding JIS Related products
ISO 37 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties JIS K 6251
  • No.119 Strograph AR-T
  • No.211 Strograph AE Elastomer
  • No.219 Strograph HT
ISO 75 Plastics-Determination of temperature of deflection under load JIS K 7191
  • No.533 HDT/VICAT Tester
ISO 132 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia) JIS K 6260
  • No.255 De Mattia Flex-Cracking Tester
  • No.263 De Mattia Flex-Cracking Tester with Thermostatic Chamber
ISO 178 Plastics — Determination of flexural properties JIS K 7171
  • No.509 Bendograph
  • No.120 Strograph T
  • No.210 Strograph E3
  • No.260 Strograph VG/VGS
ISO 179 Plastics — Determination of Charpy impact properties JIS K 7111
  • No.526 Charpy/Izod Impact Tester with Thermostatic Bath
  • No.556 Charpy/Izod Impact Tester
ISO 180 Plastics — Determination of Izod impact strength JIS K 7110
  • No.526 Charpy/Izod Impact Tester with Thermostatic Bath
  • No.556 Charpy/Izod Impact Tester
ISO 188 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests JIS K 6257
  • No.272 Geer Oven
ISO 289 Rubber, unvulcanized — Determinations using a shearing-disc viscometer JIS K 6300-1
  • No.275 Mooney Viscometer
ISO 293 Plastics — Compression moulding of test specimens of thermoplastic materials  JIS K 7151
  • No.594 Labo Press
  • No.694 Fine Labo Press
ISO 306 Plastics-Thermoplastic materials-Determination of Vicat softening temperature (VST) JIS K 7206
  • No.533 HDT/VICAT Tester
ISO 527 Plastics — Determination of tensile properties JIS K 7161
  • No.211 Strograph AE Film
  • No.218 Strograph AP
  • No.120 Strograph T
  • No.210 Strograph E3
  • No.260 Strograph VG/VGS
ISO 812 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness JIS K 6261-2
  • No.525 Brittle Point Temperature Tester
ISO 815 Rubber, vulcanized or thermoplastic — Determination of compression set JIS K 6262
  • No.245 Compression Set Apparatus (Constant Deflection)
ISO 899-1 Plastics — Determination of creep behaviour — Part 1: Tensile creep JIS K 7115
  • No.259 Creep Tester
ISO 974 Plastics — Determination of the brittleness temperature by impact JIS K 6723
  • No.525 Brittle Point Temperature Tester
ISO 1133 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics JIS K 7210
  • No.520 Melt Flow Rater
  • No.521 Semi-Auto Melt Indexer
  • No.522 Melt Indexer
ISO 1183-1 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method JIS K 7112
  • No.265 Automatic Densimeter
ISO 2528 Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method (≅JIS Z 0208)
  • No.188 Moisture Pervious Cups
ISO 1431 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking JIS K 6259
  • No.253 UVC Ozone Aging Tester
ISO 1432 Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test) JIS K 6261-3
  • No.223 Gehman Stiffness Tester
ISO 1974 Paper — Determination of tearing resistance — Elmendorf method JIS P 8116
  • No.163 Elmendorf Tearing Tester
  • No.164 Digital Elmendorf Tearing Tester
ISO 2493-2 Paper and board — Determination of resistance to bending — Part 2: Taber-type tester JIS P 8125-2
  • No.155 Taber type Stiffness Tester
ISO 2758 Paper — Determination of bursting strength JIS P 8112
  • No.167 Mullen Burst Tester
ISO 2759 Board — Determination of bursting strength JIS P 8131
  • No.167 Mullen Burst Tester
ISO 2781 Rubber, vulcanized or thermoplastic — Determination of density JIS K 6268
  • No.265 Automatic Densimeter
ISO 2782-1 Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods JIS K 6275-1 
  • No.571 Gas Transmission Rate Tester
ISO 2818 Plastics — Preparation of test specimens by machining JIS K 7144
  • No.628 Notching Tool
ISO 2921 Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test) JIS K 6261-4
  • No.226 Low Temperature Retraction Tester
ISO 4589-2 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test JIS K 7201-2
  • No.606 Candle type Flammability Tester
ISO 4649 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device JIS K 6264
  • No.276 DIN type Abrasion Tester
ISO 4662 Rubber, vulcanized or thermoplastic — Determination of rebound resilience JIS K 6255
  • No.221 Resilience Tester (Tripsometer method)
  • No.231 Schob type Automatic Rebound Tester
  • No.232 Schob type Automatic Rebound Tester
ISO 4664-1 Rubber, vulcanized or thermoplastic — Determination of dynamic properties— Part 1: General guidance JIS K 6394
  • No.651 Rheolograph-Solid (DMA)
ISO 5626 Paper — Determination of folding endurance JIS P 8115
  • No.530 MIT type Folding Endurance Tester
ISO 5627 Paper and board — Determination of smoothness (Bekk method) JIS P 8119
  • No.168 Digi-Bekk Smoothness Tester
ISO 5636-5 Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method JIS P 8117
  • No.158 Gurley type Densometer
ISO 5660-1 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) N/A
  • No.607 Cone Calorimeter
ISO 6383-2 Plastics — Film and sheeting — Determination of tear resistance — Part 2: Elmendorf method JIS K 7128-2
  • No.163 Elmendorf Tearing Tester
  • No.164 Digital Elmendorf Tearing Tester
ISO 6502 Rubber — Measurement of vulcanization characteristics using curemeters JIS K 6300-2
  • No.292 Rotorless Rheometer (MDR)
ISO 6722-1 Road vehicles — 60 V and 600 V single-core cables — Part 1: Dimensions, test methods and requirements for copper conductor cables N/A
  • No.413 ISO type Scrape Abrasion Tester
ISO 7229 Rubber- or plastics-coated fabrics — Measurement of gas permeability JIS K 6404-3
  • No.571 Gas Transmission Rate Tester
ISO 7765-1 Plastics film and sheeting — Determination of impact resistance by the free-falling dart method— Part 1: Staircase methods JIS K 7124-1
  • No.613 Dart Impact Tester
ISO 8256 Plastics — Determination of tensile-impact strength  JIS K 7160
  • No.526 Charpy/Izod Impact Tester with Thermostatic Bath
  • No.556 Charpy/Izod Impact Tester
ISO 8295 Plastics — Film and sheeting — Determination of the coefficients of friction JIS K 7125
  • No.557 Friction Tester HM-3
ISO 8780-2 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 2: Dispersion using an oscillatory shaking machine JIS K 5101-1-2
  • No.488 Paint Shaker
ISO 8780-5 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 5: Dispersion using an automatic muller JIS K 5101-1-5
  • No.465 Hoover type Automatic Muller
ISO 9073-15 Textiles — Test methods for nonwovens — Part 15: Determination of air permeability N/A
  • No.869 Frazier type Permeameter
ISO 9237 Textiles — Determination of the permeability of fabrics to air JIS L 1096
  • No.869 Frazier type Permeameter
ISO 11443 Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers JIS K 7199
  • No.583 Capillary Rheometer “Capilograph™”
ISO 12634 Graphic technology — Determination of tack of paste inks and vehicles by a rotary tackmeter (≅JIS K 5701-1)
  • No.494 Inkometer
ISO 15105-1 Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure methods JIS K 7126-1
  • No.571 Gas Transmission Rate Tester
ISO 15106-5 Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 5: Pressure sensor method JIS K 7129-5
  • No.572 Water Vapour Transmission Rate Tester
ISO 15184 Paints and varnishes — Determination of film hardness by pencil test JIS K 5600-5-4
  • No.431 Pencil Scratch Hardness Tester
ISO 16790 Plastics — Determination of drawing characteristics of thermoplastics in the molten state N/A
  • No.583 Capillary Rheometer “Capilograph™” with Melt Tension option
ISO 17855-2 Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties N/A
  • No.594 Labo Press
  • No.694 Fine Labo Press

 

 

 

Contact