Factory and Laboratory Automation Solutions
Factory and Laboratory Automation Solutions
TOYOSEIKI has been working on fully automated material testing equipment since the 1970s*.
Today, we offer a wide range of fully-automated measurement models for tensile testing of plastic and rubber materials, melt flow rate (MFR/MVR) measurement, deflection temperature under load (HDT/DTUL) measurement, rubber vulcanization testing, density specific gravity measurement, etc., which are used for quality control by customers in the materials, automotive, and other industries.
We have a wide range of fully-automated measurement models in a variety of fields, such as rubber vulcanization testing, density/specific gravity measurement, etc.
We hope you will take advantage of Toyo Seiki’s fully-automated material testing machines, which contribute not only to labor saving and efficiency improvement in measurement work, but also to reproducibility and safety improvement of measurement results.
*1st Fully-Auto Melt Flow Indexer (1971）
■Tensile testing for Plastics
Fully-Auto Tensile Testing Machine, Strograph™ AP | 218
● This is a fully automatic tensile tester exclusively for plastic test pieces.
● Once the test specimen is set on the tray, all processes from dimensional measurement ⇒ chucking ⇒ elongation measurement between marks ⇒ specimen removal ⇒ data processing are performed automatically.
● Capable of continuously testing up to 200 test pieces (ISO 527-2, ASTM D638).
● Accurate measurement from tensile modulus to elongation at break by high precision interline extensometer.
● Compact and space-saving design.
■3-point flexural testing for Plastics
Fully-Auto 3-Point Bend/Flexural Testing Machine | Bendograph™ | 509
● This is a fully automatic 3-point bending tester exclusively for plastic test pieces.
● Once the test piece is set on the tray, all processes from dimensional measurement ⇒ 3-point bending test ⇒ test piece removal ⇒ data processing are performed automatically.
● Capable of continuously testing up to 140 test pieces (ISO 178, ASTM D790).
● Compact and space-saving design.
■Tensile testing for plastic films
Fully-Auto Tensile Testing Machine, Strograph™ AE Film | 211
● This is a fully automatic tensile tester for plastic and film test pieces.
● Once the test specimen is set on the tray, all processes from dimensional measurement ⇒ chucking ⇒ elongation measurement between marks ⇒ specimen removal ⇒ data processing are performed automatically.
● Capable of continuously testing 100 test pieces (JIS Z 1702, ISO 527-3).
● Compact and space-saving design.
■Tensile testing for rubber (Room temperature)
Fully-Auto Tensile Testing Machine, Strograph™ AE Elastomer | 211
● This is a fully automatic tensile tester exclusively for rubber test pieces.
● Once the test piece is set on the tray, all processes from dimensional measurement ⇒ chucking ⇒ elongation measurement between mark lines ⇒ test piece removal ⇒ data processing are performed automatically.
● Capable of continuously testing 120 test pieces (ISO 37).
● Non-contact type* (CCD) interline extensometer is also available. (*Option)
● Compact and space-saving design.
■Tensile testing for rubber (RT to 100°C)
Fully-Auto Tensile Testing Machine for rubber, Strograph™ HT
● Automated tensile testing of rubber under temperatures ranging from room temperature (+20°C) to 100°C.
● Capable of continuously testing up to 300 test specimens (JIS K 6251).
● Effective stroke of approx. 700mm – safe even for elongated samples.
● Adopts a non-contact type (CCD) line-to-line extensometer.
■Tensile testing for rubber (-40°C to 150°C)
Fully-Auto Tensile Testing Machine for rubber, Strograph™ AR-T | 119
● Automated rubber tensile testing under temperatures from -40°C to 100°C.
● Capable of continuously testing up to 120 test specimens (JIS K 6251).
● Pre-cooling and preheating temperatures and times can be set.
● Testing starts automatically when the inside of the chamber reaches the set temperature.
■Melt Flow Index (MFR/MVR)
Fully-Auto Melt Flow Indexer, Melt Flow Rater | 520
● Fully automated Melt Indexer (Melt Flow Rate Tester, MFR/MVR Measuring Machine) from sample loading => measurement => cleaning.
● Continuous testing of 10 sample cups (40 sample cups optional) is possible.
● Compact and space-saving desktop model (*Height: 1060mm)
● Wide variety of options can be selected (automatic measurement of method A, electrically heated drying unit, dry air drying unit, load change mechanism, etc.)
■Charpy impact test for plastics
Fully-Auto Charpy Impact Tester | 625
● Automatically performs specimen transfer ⇒ specimen thickness and notch depth measurement ⇒ set on specimen table ⇒ measurement data processing.
● Maximum 300 specimens can be tested continuously.
■Notching process for impact specimens
Notching Tool™ | 628
● This automatic machine performs notch cutting on Charpy Izod impact test specimens in accordance with JIS K 7144 and ISO 2819, which specify the notch cutting conditions.
● A maximum of 25 specimens (4 mm) can be set in the specimen clamp.
● Processing conditions (depth of cut per cut, feed rate, etc.) can be set and registered according to the specimen material.
● Pulse motor enables high-precision notch cutting in 0.01mm increments.
● In addition to notch cutting of impact test specimens, Model A-4 can also cut (both end slicing and side cutting) impact, bending, creep, and other test specimens from JIS K 7139 and ISO 3167 multipurpose test specimens (A-type dumbbell).
■Dimensional measurement of impact specimen
Impact Specimen Dimensional Measuring Device | 138
● This device automatically measures the thickness and remaining width of Charpy Izod impact test specimens.
● The thickness and remaining width measured by this device are automatically transferred to and input into the impact tester and data processing software*. (*Option)
● This eliminates the need for dimensional measurement of test specimens and input of numerical values, contributing to more efficient measurement work.
■HDT / Vicat testing
Fully-Auto HDT/Vicat Testing Machine | 533
● This tester (heat distortion tester) evaluates the heat resistance of plastic materials.
● This model incorporates an automatic specimen supply/removal device, enabling completely unmanned operation.
● The tester is selectable between 3- and 6-unit models, with the 3-unit model capable of testing up to 120 specimens and the 6-unit model capable of testing up to 240 specimens continuously (for a thickness of 4 mm). (For a thickness of 4 mm)
■Moving Die Rheometer (MDR)
Rotorless Rheometer | 292
● This is a vulcanization tester (Rotorless Rheometer/MDR) for evaluating vulcanization characteristics of rubber.
● Full automation (continuous testing of 84 specimens) is possible by attaching an optional automatic specimen loading/unloading device and data processing device.
● Automatic specimen loading/unloading device can be selected between film type and pin type, which is advantageous in terms of running cost.
● The specimen chamber die can be selected from flat die and tapered die specifications.
■Rubber resilience
Schob type Automatic Rebound Tester | 231
● This tester measures the rebound angle of rubber test pieces and calculates the rebound modulus.
● Capable of continuously testing up to 20 test pieces (ISO 4662).
■Density
Fully-Auto Density Tester | 265
● This tester is used to measure the density (specific gravity) of rubber and plastic specimens by the underwater displacement method (weighing method in liquid).
● Capable of continuously testing up to 64 plastic and rubber test pieces.
● Balance: Maximum weighing capacity 100g, minimum display 0.1mg
Contact
-
Inquiries from the web
Contact Form -
Inquiries by telephone