back to top

Charpy/Izod Specimen Automatic Measuring Device | 138-NTM

  • NTM NTM
  • NTM

Charpy/Izod Specimen Automatic Measuring Device | 138-NTM

This device automatically measures “thickness” and “remaining width” of Charpy/Izod/Tensile impact specimen and transfer and set them to a Pendulum Impact Tester and PC* .  (*PC is option)

 

Features & Benefits

• Just by placing the specimen and pressing the measurement button, the remaining width and thickness of the notched specimen for Charpy/Izod and Tensile impact test are automatically and continuously measured.

• The time required for dimensional measurement is greatly reduced and the test can be performed efficiently.

• In addition, by connecting to the main body of the pendulum impact tester and PC* (*optional), the measured specimen dimensions can be automatically transferred.

 

Model NTM
Measuring method Linear gauge (air cylinder driven)
Measurement items • Thickness

• Remaining width
Measurement accuracy ±0.01mm
Specimen size  • Thickness 10±0.5mm, remaining width 8±0.5mm (Charpy)

• Thickness 12.7±0.5mm, remaining width 10.16±0.5mm (Izod)
Communication port • Serial (D-sub 9 pin): x2

• Serial (D-sub 25 pin): x 1
Communication mode PC ← NTM ↔ Impact Tester
Power supply Single-phase, AC100-240V, 50/60Hz, 0.2kVA (or specify)
Compressed air 0.2MPa
Dimensions W200 × D300 × H280mm
Weight (approx.) 7kg

 

PDF

Related Products

Pendulum Impact Tester (Charpy/Izod) | 556-IT

Contact