Stand-alone Single-screw Extruder | 675
Stand-alone Single-screw Extruder | 675
Laboratory-scale single-screw extruder that can share various options of the modular torque rheometer systems “Labo Plastomill”.
| Model | ER-1 |
| Extrusion output | 8kg/h |
| Screw diameter | ∅30mm |
| L/D | 28 |
| Speed | 10 to 100rpm |
| Max. torque | 700Nm |
| Screw | Full-flight |
| Compression ratio | CR=3.00 (Standard) |
| Motor | 3.7kW, Inverter-driven |
| Cylinder | 4 zones, Max. temperature 350°C |
| Hopper capacity | 10L |
| Temperature controller | – Standard: 6 points (Cylinder×4, Flange×1, Die×1）
– Option : 9 points |
| Power supply | Three-phase, AC200V, 50/60Hz, 100A |
| Cooling water requirement | Approx. 10L/min |
| Dimensions | W940 × D1400 × H1490mm |
| Weight | Approx. 520kg |
Modular Torque Rheometer | Labo Plastomill™ | 655
Measuring Mixers for Labo Plastomill | 655
Measuring Single-screw Extruders for Labo Plastomill | 655
Mini-Torque Rheometer | Labo Plastomill™ Micro | 666
Contact
-
Inquiries from the web
Contact Form -
Inquiries by telephone