Labo Press | 594
Labo Press | 594
Medium-sized press machine for compression molding plastic and rubber.
[P2-30T]
The heating and cooling plates are independent, allowing the heating plate to maintain a constant temperature.
This means that there is no need to wait for the machine to reheat and the work cycle can be significantly reduced.
[10T]
The cooling temperature can be controlled during cooling.
| Model | P2-30T | 10T |
| Max output | 300kN | 100kN |
| Heating/cooling plate | 300 × 400mm | 200 × 200mm |
| Plate interval | 120mm ±3mm | 100mm ±3mm |
| Average cooling rate | —– | 15°C/min. |
| Temperature range | RT(+20°C) to 300°C | |
| Auto-deforming | Max. 99times | |
| Preheat timer | Max. 99min.59sec. | |
| Pressure timer | Max. 99min.59sec. | |
| Power supply | Single-phase, AC200V, 50/60Hz, 30A | |
| Dimensions | W1100 × D760 × H1650mm | W630 × D600 × H1130mm |
| Weight (Approx.) | 800kg | 500kg |
Fine Labo Press | 694
Manual Bench Top Laboratory Press【Mini Test Press™】 | 519
Contact
-
Inquiries from the web
Contact Form -
Inquiries by telephone