back to top

Manual Bench Top Laboratory Press【Mini Test Press™】 | 519

Manual Bench Top Laboratory Press【Mini Test Press™】 | 519

The compact, bench-top Mini Test Press™ is used as a plastic compression machine. 

 

The press is equipped with a two-speed manual hydraulic cylinder pressure system. 

 

An optional water-cooled, insulated plate sandwich to cold press samples without cooling down platen is also available.

Dimensions of heating plate 200 × 200mm or 250 × 250mm
Platen Separation 100mm max.  (water cooling platen equipped model 75mm max.)
Pressure System Hydraulic cylinder
Compression Load 100kN at 30MPa
Pressure Indicator Analog pressure gauge, max scale: 35MPa
Temperature Range RT(+10°C) to 300°C or 400°C
Temperature Control Dual PID controllers, with auto tuning function, digital readouts
Power Supply Single-phase, AC200V, 50/60Hz, 4kVA (or specify)
Cooling Water  0.15MPa, 20L/min. max.
Dimensions W520 × D390 × H680mm (Handle is not included)
Weight (approx.) 90kg

 

Models

 

■ 200 × 200mm models

Model Water Cooling plate Max. temperature
MP-SNL N/A 300°C
MP-SCL Fixed type 300°C
MP-SNH N/A 400°C
MP-SCH Fixed type 400°C
MP-2F Swivel type 300°C
MP-2FH Swivel type 400°C
MP-SC Unheated (water cooling only)

MP-2F, MP-2FH: Maximum opening when using water cooling plate: 25mm

 

■ 250 × 250mm models

Model Cooling platen Max. temperature
MP-WNL N/A 300°C
MP-WCL Fixed type 300°C
MP-WNH N/A 400°C
MP-WCH Fixed type 400°C
MP-WC Unheated (water cooling only)

 

Options

Code Name
AIR-C Air Cooling Unit
SC Safety Cover
ISC Inter-lock type Safety Cover
PHDAI Handle Installation Plate
DAI Table
T-CONT Temperature Controller (Programmed heating rate)
TEMPG Over-temperature Protection Unit
PARA Heating Plate Parallel Auxiliary Mechanism

 

PDF

Contact