6-Station Thrust Bearing and Abrasion Tester | 393
6-Station Thrust Bearing and Abrasion Tester | 393
Related standard(s): JIS K 7218
This is an abrasion tester in which a plastic specimen set on a rotating shaft is brought into contact with another material under a constant load.
| JIS K 7218 | Testing Methods for Sliding Wear Resistance of Plastics |
| Needle diameter | ∅0.45mm |
| Needle travel distance | 20mm |
| Speed | 55cpm (Adjustable in 50 to 60cpm at the time of inspection) |
| Abrasion length | 15.5±1mm |
| Vertical force | 7N |
| Specimen base | Groove depth 0.4mm and 0.8mm (2 kinds) |
| Counter | Electronic counter, 6 digits |
| Power supply | Single-phase, AC100V, 50/60Hz, 0.3kVA (or specify) |
| Dimensions | W110 × D410 × H290mm |
| Weight | Approx. 25kg |
Contact
-
Inquiries from the web
Contact Form -
Inquiries by telephone