Flat Surface Abrasion Tester | 391
Flat Surface Abrasion Tester | 391
No applicable standard(s)
The Flat Surface Abrasion Tester evaluates the abrasion by adding abrasive load to the test specimen such as a fabric cloth, paint film and paper board under a specified conditions.
| Model | FF |
| Number of test specimen | 2 samples |
| Test load | max. 2000g |
| Weight | Arm self-weight 0g (by counter balance weight)
Load weight 100g×2, 300g, 500g, 1000g |
| Dimension of test specimen | 50 × 100mm |
| Reciprocation distance of specimen table | 30, 40, 50, 60mm, variable |
| Reciprocation speed of specimen table | approx. 10 to 70cpm, variable |
| Abrader | W20 × T10 × 10mm (radius of end) |
| Specimen arm | can be adjusted up and down (Adjustment distance 0 to 30mm) |
| Counter | 5 digits preset counter |
| Power supply | Single-phase, AC100V, 50/60Hz, 0.3kVA (or specify) |
| Dimensions | W500 × D200 × H500mm |
| Weight (approx.) | 25kg |
Contact
-
Inquiries from the web
Contact Form -
Inquiries by telephone