TOYOSEIKI GENERAL CATALOGUE

53/72

GENERAL CATALOGUE　　514 GENERAL CATALOGUE　　51PROCESSABILITIES 4 PROCESSABILITIES PRESSURE SENSITIVE ADHESIVE, TACKINESS ･･･ (RUBBER, TAPE)No. 235 PICMA TACK TESTERNo. 236 TACKINESS CHECKERPRESSURE SENSITIVE ADHESIVE, TACKINESS ･･･ (RUBBER, TAPE)■APPLICATIOＮ　 In the molding process of tires, belts, etc. where components including rubber materials and reinforcement materials are bonded in multi layers and vulcanized, it is very important to check component tackiness before forming process. This machine is developed to allow on-site check of tackiness of rubber components; it might also be applicable to tackiness check of adhesive tapes. ■SPECIFICATIONS■APPLICATIOＮ　 This is a pick up type tester for easily testing tack of unvulcanized rubber or adhesive body surface.Model PICMAⅠPICMAⅡSticking load 4.9N0.98-4.9N (0.98N steps)Measuring load range0.1〜15N (1div=0.1N) 0.5〜25N (1div=0.5N) Test speed5, 6, 7.5, 10, 15, 20, 25,30mm/min. 3, 10, 30, 50, 70, 100, 125, 150, 200, 300cm/min. Sticking time 1〜72 sec.0.5〜99.9 sec.Electric sourceAC100V, 1-P, 50/60Hz, 1AAC100V, 1-P, 50/60Hz, 2ADimensionsW200 x D220 x H430mmW265 x D300 x H584mm Net weight Approx. 8.5kg Approx. 25kg Optiona.Cassette for lower test piece slide (ten-place feed)b.Constant temperature bath:Ambient temp. to 80℃Constant temperature batha.0 to 100℃b.Ambient temp. +20℃ to 150℃Model HTC-1Measure tackiness Load cell system(max. 20N, resolution 0.1N)Press force10N (standard) 5N – 12N (variable)Press time3 sec / 6 sec (selection)Test N number 1/3/5 times (selection)Contact ring(material)SBR O-ring, Aluminum curvature surface ringTime/testApprox. 7 sec (when press time is 3 sec)Power source Lithium ion battery 7.4V 2000mA(Ref) about 1200 tests when fully-chargedDimension & weightW118 x D72 x H222 mm, 1.3kg■SPECIFICATIONSPICMAⅠPICMAⅡ

※このページを正しく表示するにはFlashPlayer10.2以上が必要です